Sony PCV-RX260DS - Vaio Digital Studio Desktop Computer Reference Manual Download

Page: 51 / 114

Removing, Installing, and Replacing Components

Installing a 3½” Internal Hard Disk Drive

Your system comes with an available bay to hold an additional 3½” hard
disk drive. The drive you install must not require front panel access. The
hard disk drive access light blinks when either internal drive is active.

Configure the jumpers on the new drive as a slave device (see your
drive’s documentation for configuration instructions).

Disconnect the power cord from the computer.

Remove the side cover (see

“Removing the Side Cover”

on page 22).

Before opening the system unit, save any open files, exit Windows, turn off

the power of the computer and all attached peripherals, and then unplug the
power cord.

KY0084.VSD

Drive connector

Power connector

Jumpers

Summary of Contents for PCV-RX260DS - Vaio Digital Studio Desktop Computer



















































































































Search results

Summary of Contents for PCV-RX260DS - Vaio Digital Studio Desktop Computer

Reviews:

Related manuals for PCV-RX260DS - Vaio Digital Studio Desktop Computer

Brands by name

Popular brands

Sony PCV-RX260DS - Vaio Digital Studio Desktop Computer, Reference Manual

Search results

Summary of Contents for PCV-RX260DS - Vaio Digital Studio Desktop Computer

Reviews:

Related manuals for PCV-RX260DS - Vaio Digital Studio Desktop Computer

Brands by name

Popular brands