Sony PCV-R526DS - Vaio Digital Studio Desktop Computer, User Manual

Page: 83 / 245

Notes on Use
On the Power Source

Your computer operates on 100-120 V AC 50/60 Hz only. If you are operating this computer outside of North
America or Japan, please verify that the local AC specifications match before plugging in the computer.

The total power draw of installed add-in cards must not exceed the specifications for the power supply. Do
not overload the system by installing add-in cards that draw excessive current. The system is designed to
provide 2 amps (average) of 5V power for each card in the system not to exceed a total of 10 amps. The
total from +5V current draw in a fully-loaded system (with all the add-in card slots filled) must not exceed 10
amps. If you add components to the system that draw current from the power supply, the maximum combined
+3.3V and +5V output must not exceed 70 watts.
 Plug all the power cords for your computer and its peripheral equipment into the same AC supply line. AC
derived from different supply lines may result in voltage differences that can cause unstable operation or
unwanted weak currents at the time of connection.

Do not share the AC outlet with any other power-consuming equipment, such as copying machines or
shredders.

You can purchase a power strip with a surge protector. This device prevents damage to your computer
caused by sudden power surges such as those that may occur during an electrical storm.

If you live in an area that experiences frequent power fluctuations, you may want to purchase a UPS
(Uninterrupted Power Supply). This device contains both a surge protector and a battery backup. The surge
protector prevents damage to your computer caused by power surges. The battery backup safeguards your
data during a brief period of power loss.

The power control button on the front panel does not turn off the system AC power. To remove power from
the system, you must shut down the computer as described in the User Guide and then unplug the AC power
cord from the wall outlet or power strip.

Do not place heavy objects on the power cord.

Do not operate the system with the cover removed. Always
reinstall the cover before turning on the system.

To disconnect the cord, pull it out by the plug. Never pull the
cord itself.

Unplug your computer from the wall outlet if you will not be using the computer for a long time.

Before touching anything inside the computer, turn the system off and let it cool for ten minutes. This will
ensure that the processor heat sink will not be hot.

Do not attempt to open the power supply. There are no user-serviceable parts in the power supply. To avoid
personal injury or damage to your equipment, refer the repair or replacement of the power supply to qualified
personnel only.
On Disposal of the Lithium Battery
Dispose of the lithium battery properly. In some areas, the disposal of lithium batteries in household or business trash
may be prohibited. You can return your unwanted lithium batteries to your nearest Sony Service Center or Factory
Service Center. For the Sony Service Center nearest you, call 1-888-4SONY-PC (1-888-476-6972).
! Do not handle damaged or leaking lithium batteries.
! The lithium battery may explode if mistreated. Do not disassemble it or
dispose of it in fire.
Replace the battery with a Sony CR2032 lithium battery. Using a type of battery other than a CR2032 may present a
risk of fire or explosion.
On Handling

Clean the cabinet with a soft, dry cloth or a soft cloth lightly moistened with a mild detergent solution. Do not
use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzine, as it may damage the
Page 83