Sony PCV-J100 - Vaio Desktop Computer Reference Manual Download Page 54

Page: 54 / 114

VAIO® Reference Manual

Installing a 3½” Internal Hard Disk Drive

Your system comes with an available bay to hold an additional 3½” IDE
hard disk drive. The drive you install must not require front panel access.
The hard disk drive access light blinks when either internal drive is
active.

Configure the jumpers on the new drive as a slave device (see your
drive’s documentation for configuration instructions).

Disconnect the power cord from the computer.

Remove the side panel (see

“Removing the Side Panel”

on page 22).

Lift the tab adjacent to the drive holder.

Before opening the system unit, save any open files, exit Windows, turn off

the power of the computer and all attached peripherals, and then unplug the
power cord.

KY0084.VSD

Drive connector

Power connector

Jumpers

Summary of Contents for PCV-J100 - Vaio Desktop Computer



















































































































Search results

Summary of Contents for PCV-J100 - Vaio Desktop Computer

Reviews:

Related manuals for PCV-J100 - Vaio Desktop Computer

Brands by name

Popular brands

Sony PCV-J100 - Vaio Desktop Computer, Reference Manual

Search results

Summary of Contents for PCV-J100 - Vaio Desktop Computer

Reviews:

Related manuals for PCV-J100 - Vaio Desktop Computer

Brands by name

Popular brands