Sony PCS-1 - Video Conferencing Kit, Operating Instructions Manual, Page: 123 / 284

123
Sending a Still Image
C
hap
te
r 4:
Vi
de
oco
n
fe
re
n
c
e W
ith
O
p
tio
nal
Equ
ipm
en
t
During communication a motion picture output from an external camera or
VCR connected to the Communication Terminal can be frozen, and then sent
to the remote party.
To send a still image
1
Open the Still Image menu.
Press the MENU button on the Remote Commander to display the Setup menu,
then select the
(still image) icon with the
V
or
v
button.
2
Display the picture you want to send on the monitor screen.
Press the VIDEO INPUT SELECT button on the Remote Commander to
display the Video Input Select menu, then select the input from which you want
to send a picture under “Near”, and press the PUSH ENTER button.
AUX 1 : Selects the picture input from equipment connected to the VIDEO IN
AUX 1 connector.
AUX 2: Selects the picture input from equipment connected to the VIDEO IN
AUX 2 connector.
• Selecting “Object” enables you to display the picture input from the optional
PCS-DS150/DS150P Document Stand (currently not available) on the monitor
screen.
• If you change the label of the video input using the Custom Input Label menu in
Page 4 of the General Setup menu, the labeled name is displayed instead of
“AUX1”, “AUX2” or “Object”.
Sending Motion Pictures Input from an External Camera or Other
Equipment as Still Images
Notes
DC 19.5V
AUDIO OUT AUDIO IN AUX1– VIDEO IN–AUX2 CAMERA UNIT MIC
(PLUG IN POWER)
XXXX WHITE
BOARD
(MIXED)
AUX MAIN– MONITOR– SUB
VIDEO OUT
RGB OUT XXXXXX
IR OUT
100BASE-TX
10BASE-T
1 2
1 2
External camera, VCR, etc.
to S-video
output
to video output
S-video connecting cable (not supplied)
to VIDEO IN
AUX1
to VIDEO IN
AUX2
Video connecting cable (not supplied)