Sony PCM-M10 Operating Instructions Manual Download Page 75

Page: 75 / 120

out

the

Fu
ncti

Protect

Protect the selected track to prevent the track from being deleted
or divided.
Execute:

Protect the selected track. If you specify a track which has
already been protected, cancel the protection.

Cancel

Protection or cancel protection is not executed.

Memory

Select the memory in which you want to save a track, or which
contains the track you want to play, edit, or copy.
Built-In Memory*:

The built-in memory of the PCM recorder is selected.

Memory Card:

The memory card inserted in the memory card slot is selected.

Note

When no memory card is currently inserted in the PCM recorder,
the built-in memory is automatically selected.

Menu items

Settings (*: Initial setting)

See page

Summary of Contents for PCM-M10

























































































































Search results

Summary of Contents for PCM-M10

Reviews:

Related manuals for PCM-M10

Brands by name

Popular brands

Sony PCM-M10, Operating Instructions Manual

Search results

Summary of Contents for PCM-M10

Reviews:

Related manuals for PCM-M10

Brands by name

Popular brands