PCM-D100
24
4-5. Power Down
It can change into the power off state.
Procedure:
1. Enter the test mode.
(Refer to “SETTING THE TEST MODE” on page 22)
2. Press the [
v
] or [
V
] keys to select the “Power Down”, and
press the [
N
] key.
3. The power down selection screen is displayed.
This unit shifts to turn the power off by slide the [POWER]
switch in the direction of “OFF”, and release the test mode.
4-6. LCD Offset
LCD contrast can be adjusted.
Procedure:
1. Enter the test mode.
(Refer to “SETTING THE TEST MODE” on page 22)
2. Press the [
v
] or [
V
] keys to select the “LCD Offset”, and press
the [
N
] key.
3. Adjustment of LCD contrast becomes available.
(Displayed characters/values in the following fi gure are ex-
ample)
<LCD Offset>
Value : 00
[FF]:+ [FR]:–
[PLAY]:Save
LCD Display
Initial value:
The default setting saved at eMMC.
Key input settings under this mode of operation:
[
.
] : Contrast value decrease (Minimum –20)
[
>
]
: Contrast value increase (M20)
[
N
]
: The current contrast value is written to eMMC.
Releasing method:
Press the [
x
STOP] key, return to test mode menu.
4-7. LCD/Led/Light
The lighting check of LCD can be performed.
Procedure:
1. Enter the test mode.
(Refer to “SETTING THE TEST MODE” on page 22)
2. Press
the
[
v
] or [
V
] keys to select the “LCD/Led/Light”, and
press the [
N
] key.
3. LCD display pattern is displayed as shown in the following
fi gure.
(Displayed characters/values in the following fi gure are ex-
ample)
LCD Display Pattern
All segments ON
All segments OFF
Display pattern 1
Display pattern 2
Gray scale
Key input settings under this mode of operation:
[
>
] or [
.
]
: Display pattern change
[LIGHT]
:
LCD backlight and [REC LEVEL] dial
backlight are on/off change
[
v
]
: All the LED on
[
V
]
: All the LED off
Releasing method:
Press the [
x
STOP] key, return to test mode menu.