Sony PCM-D10, Help Manual, Page: 222 / 224

The sum of files in a folder or the total number of files will exceed the limit. You cannot divide the file. Delete unnecessary files
and divide the file once again.
(See
Deleting a file .)
Same File Name Exists
There already is a file with the same name. You cannot create more than one file with the same name.
System Error
A system error was detected for some reason. Remove the batteries from the linear PCM recorder, insert them back in place,
and then turn the power back on. If the error persists, consult your nearest Sony dealer.
(See
Customer support websites .)
Operation Invalid While Playing
You have selected a menu item on the OPTION or Settings menu that is not available for execution during playback. Stop
playback and select the item once again.
Operation Invalid While Recording
You have selected a menu item on the OPTION or Settings menu that is not available for execution during audio recording. Stop
recording and select the item once again.
Continue REC in Other Memory
While the Cross-Memory REC function is turned on, your linear PCM recorder automatically switches the file storage destination
folder to the alternate memory storage and keeps recording when the capacity of the current memory storage is used up.
(See
Switching the memory storage to keep recording (Cross-Memory REC) .)
Cannot Use Phantom Power Because the Battery Is Low
The remaining battery power is not enough for the linear PCM recorder to supply power to the connected external microphone.
Replace the batteries with new ones.
Phantom Power Has Been Turned Off Because It Exceeds the Recorder's Power Capacity.
Phantom power supply is shut down because the amount of power exceeds the capacity of the linear PCM recorder to supply
power to the external microphone.
LIMITER and LCF are Available Only When MIC Is Selected For Both L/R
When a device is connected to the XLR/TRS jack(s) and either or both of the left and right XLR/TRS INPUT LEVEL switches
are placed in the [LINE] position, the LCF(Low Cut) or LIMITER function does not work.
Pairing Unsuccessful. Try Again.
An attempt to make device registration (pairing) between your linear PCM recorder and a smartphone failed. Turn on the
Bluetooth function on your smartphone and try again.
(See
Establishing a Bluetooth connection between the smartphone and the linear PCM recorder .)
Cannot Connect. Check the Other Device and Try to Reconnect to It.
An attempt to establish a Bluetooth connection failed. Turn on the Bluetooth function on the Bluetooth audio device and try
again.
Cannot Add. Disconnect Connected REC Remote and Try Again.
While a connection with the smartphone with REC Remote installed is established, you cannot make device registration
(pairing) with another smartphone. Disconnect the connection with the current smartphone and try again.
Cannot Add a Device While Connected to a Bluetooth Device. Please Disconnect.
While a Bluetooth connection is established, you cannot make device registration (pairing) with another audio device or
smartphone. Disconnect the Bluetooth connection and try again.
Cannot Delete the Connected Bluetooth Device. Please Disconnect.
You cannot delete the device information of the audio device or the smartphone that is currently connected via the Bluetooth
connection. Disconnect the Bluetooth connection and try again.
(See
Disconnecting the Bluetooth connection (Bluetooth function).)
(See Disconnecting the Bluetooth connection (REC Remote).)
222