Sony PCM-D10, Help Manual, Page: 146 / 224

Help Guide
Linear PCM Recorder
PCM-D10
Setting the time period before the linear PCM recorder goes into low power consumption
mode (Auto Standby)
You can set your linear PCM recorder to go into low power consumption mode if it is left unused for the specified period time.
Description of menu items
You can select one of the following items:
OFF:
Turns off the Auto Standby function.
5min:
Places the linear PCM recorder into low power consumption mode in approximately 5 minutes.
10min:
Places the linear PCM recorder into low power consumption mode in approximately 10 minutes.
30min:
Places the linear PCM recorder into low power consumption mode in approximately 30 minutes (default setting).
60min:
Places the linear PCM recorder into low power consumption mode in approximately 60 minutes.
Hint
The Auto Standby function is still active while a Bluetooth connection is established. When your linear PCM recorder goes into low power
consumption mode, the Bluetooth connection is disconnected. To avoid this, change the time period for the Auto Standby function to suit
your needs.
Related Topic
Turning the power on
Releasing the linear PCM recorder from the HOLD state
4-744-529-11(2) Copyright 2018 Sony Corporation
Select [ Settings] - [Common Settings] - [Auto Standby] from the HOME menu, and then press .
1
Press or to select the desired time period, and then press .
2
Press and hold BACK/HOME to return to the HOME menu.
To return to the screen before you displayed the HOME menu, press STOP.
3
146