Sony PCG-Z1WAP VAIO User Guide (primary manual) User Manual Download

Page: 157 / 171

Removing and Installing Memory Modules

Make sure you read the safety information in

Precautions and Procedures

before you remove or install a memory module.

When installing a memory module, do not open the module package until you are ready to install it. The package protects
the module from Electrostatic discharge (ESD).

To remove a memory module

Turn off the computer and all attached devices.

Disconnect the power cord, all cables, and remove the battery if it is installed. See

Removing a battery.

Wait for the computer to cool down.

The interior of the computer becomes extremely hot during operation. Wait at least one hour for the computer to

cool down before you remove the screws.

Turn the computer over and use an appropriate screwdriver to loosen and remove the two screws on the bottom
of the computer.

To avoid damaging the computer, do not remove or loosen any other screws.

Rem ov ing the Bottom Screw(s)

Position the computer so you are looking at the keyboard, and place your fingers behind the last row of keys.

Positioning the Com puter

Gently lift the keyboard up and turn it over the touch pad. Do not detach the cable when lifting the keyboard.

Lifting the Keyboard

Page 157

Summary of Contents for PCG-Z1WAP VAIO User Guide (primary manual)












































































































































































Search results

Summary of Contents for PCG-Z1WAP VAIO User Guide (primary manual)

Reviews:

Related manuals for PCG-Z1WAP VAIO User Guide (primary manual)

Brands by name

Popular brands

Sony PCG-Z1WAP VAIO User Guide (primary manual), User Manual

Search results

Summary of Contents for PCG-Z1WAP VAIO User Guide (primary manual)

Reviews:

Related manuals for PCG-Z1WAP VAIO User Guide (primary manual)

Brands by name

Popular brands