Sony PCG-Z1WAMP3 VAIO User Guide (primary manual) User Manual Download Page 11

Page: 11 / 171

Turning on the computer

To open and turn on the computer

Lift the cover while holding the bottom of the computer firmly.

Opening the Com puter

Press the power button on the right until the power indicator turns on.

Turning on the Com puter

If you continue to press the power button, the computer turns off.

If the computer screen is too dark or too bright, follow these steps to adjust the brightness:



To increase brightness, press the

and

keys, and then press the

Up Arrow

or the

Right Arrow

key.



To decrease brightness, press the

and

keys, and then press the

Down Arrow

or the

Left

Arrow

key.

Page 11

Summary of Contents for PCG-Z1WAMP3 VAIO User Guide (primary manual)












































































































































































Search results

Summary of Contents for PCG-Z1WAMP3 VAIO User Guide (primary manual)

Reviews:

Related manuals for PCG-Z1WAMP3 VAIO User Guide (primary manual)

Brands by name

Popular brands

Sony PCG-Z1WAMP3 VAIO User Guide (primary manual), User Manual

Search results

Summary of Contents for PCG-Z1WAMP3 VAIO User Guide (primary manual)

Reviews:

Related manuals for PCG-Z1WAMP3 VAIO User Guide (primary manual)

Brands by name

Popular brands