Sony PCG-Z1WAMP3 VAIO User Guide (primary manual) User Manual Download Page 108

Page: 108 / 171

Combinations and functions with the Fn key

Combinations/

Feature

Function

Fn+F3

Toggles the built-in speakers off and on.

Fn+F4 Adjusts the built-in speaker volume. An on-screen display appears notifying you when a change occurs.

To increase volume, press

and then press

To decrease volume, press

and then press

Fn+F5 Adjusts the brightness of the computer screen (LCD).

To increase brightness, press

and then press

To decrease brightness, press

and then press

Fn+F7 Toggles the display between the computer screen (LCD), a connected external device, such as a monitor, flat-panel
display or projector, and both the LCD and external device.

Select one display at a time when playing a DVD. Connect the cable before you turn on the computer; otherwise, Fn+F7
may not work.
Fn+F12

Puts the system into Hibernate mode, a power management state. To return the system to normal

operating mode, press the power button. Hibernate mode consumes the lowest level of power.
Fn+Esc

Puts the system into Standby mode, a power management state. To return the system to the active state,

press any key or the power button.

Page 108

Summary of Contents for PCG-Z1WAMP3 VAIO User Guide (primary manual)












































































































































































Search results

Summary of Contents for PCG-Z1WAMP3 VAIO User Guide (primary manual)

Reviews:

Related manuals for PCG-Z1WAMP3 VAIO User Guide (primary manual)

Brands by name

Popular brands

Sony PCG-Z1WAMP3 VAIO User Guide (primary manual), User Manual

Search results

Summary of Contents for PCG-Z1WAMP3 VAIO User Guide (primary manual)

Reviews:

Related manuals for PCG-Z1WAMP3 VAIO User Guide (primary manual)

Brands by name

Popular brands