Sony PCG-Z1WAMP2 VAIO User Guide (primary manual) User Manual Download Page 92

Page: 92 / 171

Inserting Memory Stick media

The media slot accommodates only one Memory Stick media at a time.

To insert Memory Stick media

Insert the Memory Stick media with the arrow facing up and toward the Memory Stick media slot.

Inserting the media in the wrong direction may damage the connector pins.

Carefully slide the Memory Stick media into the slot until it clicks in place. The Memory Stick media indicator briefly
blinks.

Inserting Mem ory Stick Media

Page 92

Summary of Contents for PCG-Z1WAMP2 VAIO User Guide (primary manual)












































































































































































Search results

Summary of Contents for PCG-Z1WAMP2 VAIO User Guide (primary manual)

Reviews:

Related manuals for PCG-Z1WAMP2 VAIO User Guide (primary manual)

Brands by name

Popular brands

Sony PCG-Z1WAMP2 VAIO User Guide (primary manual), User Manual

Search results

Summary of Contents for PCG-Z1WAMP2 VAIO User Guide (primary manual)

Reviews:

Related manuals for PCG-Z1WAMP2 VAIO User Guide (primary manual)

Brands by name

Popular brands