Sony PCG-Z1WAMP2 VAIO User Guide (primary manual) User Manual Download Page 13

Page: 13 / 171

Inserting a battery

To insert a battery

Turn the computer over, and slide the

UNLOCK/LOCK

latch on the bottom of the computer to the

UNLOCK

position.

Align the grooves on the battery with the tabs on the back of the computer.

Inserting a Battery

Slide the battery into the computer until it clicks into place.

Slide the

UNLOCK/LOCK

latch into the

LOCK

position.

If a port replicator is attached to your computer, do not insert or remove the battery. Lifting and turning the computer

with a port replicator attached could cause a temporary loss of power.

Some programs and attached devices prevent the system from automatically entering Hibernate mode. If you are using
battery power, save your data frequently to avoid data loss and manually activate a power saving mode. See

Using power

saving modes

for more information.

Page 13

Summary of Contents for PCG-Z1WAMP2 VAIO User Guide (primary manual)












































































































































































Search results

Summary of Contents for PCG-Z1WAMP2 VAIO User Guide (primary manual)

Reviews:

Related manuals for PCG-Z1WAMP2 VAIO User Guide (primary manual)

Brands by name

Popular brands

Sony PCG-Z1WAMP2 VAIO User Guide (primary manual), User Manual

Search results

Summary of Contents for PCG-Z1WAMP2 VAIO User Guide (primary manual)

Reviews:

Related manuals for PCG-Z1WAMP2 VAIO User Guide (primary manual)

Brands by name

Popular brands