3.
Type the name of the network (access point) you want to connect to in the
Network name (SSID)
box. (The
name should be no more than 32 ASCII characters.)
The following steps are for networks that require a network key. If you do not know the network key or are not
sure a network key is required, see the network administrator or the guide that accompanied your access point for
more information.
4.
Make sure the
Data encryption (WEP enabled)
check box is selected.
5.
Click to cancel the
The key is provided for me automatically
check box.
6.
Type the network key in the
Network key
box. (The key should be 5 or 13 ASCII characters or 10 or 26
hexadecimal characters.)
7.
Retype the network key in the
Confirm network key
box.
8.
Click
OK
. The network name appears in the
Preferred networks
list box.
To set up a computer-to-computer (ad-hoc) network
1.
Move the Wireless LAN switch to
ON
.
Turning on the Wireless Network Switch
2.
Click the
Wireless Network Connection
icon
on the taskbar. The
Wireless
Network Connection
dialog box
appears.
Wireless Network Connection
Page 29
Summary of Contents for PCG-TR1A - VAIO - Pentium M 900 MHz
Page 40: ...Page 40 ...
