manualshive.com logo in svg

Sony PCG-R505EL VAIO User Guide (primary manual), User Manual

Share
Download
Sony PCG-R505EL VAIO User Guide (primary manual) User Manual Download Page 65

Connecting an External Display

65

To connect a projector (such as a Sony LCD Projector) to your computer

1

Make sure the projector is plugged into an AC outlet.

2

Open the monitor port panel on the right side of the computer.

3

Plug the RGB signal cable into the monitor port, and make sure it is 
connected to the projector. 

4

Plug the audio cable into the green Headphone jack on the right side of the 
computer, and make sure it is connected to the projector.

5

Press the key combination Fn + F7 to change the display to projector.

6

See the manual that came with your projector for more information on 
installation and operation.

Connecting Monitor to the Docking Station

Computer display

Power cord

Display cable (optional)

Summary of Contents for PCG-R505EL VAIO User Guide (primary manual)































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands