Chapter
3
14
3-1 Setting Up the Unit / 3-2 Software Installation
Chapt
er
3
P
rep
ar
at
ions
Preparations
3-1 Setting Up
the Unit
Make sure the unit is in a horizontal
position when setting it up.
• The unit cannot be set up in a vertical
position or at an angle.
• If the unit is not sufficiently horizontal,
an ALARM indicator may blink.
• If the ALARM indicator blinks, place
the unit in a horizontal position, turn
the power off, then turn the power on
again.
3-2 Software
Installation
To use this unit, the necessary software
must first be installed on the computer
to which it is connected.
Operation of Optical Disc Archive
Software or the Utility Software may be
unstable if installed on a computer with
certain anti-virus software, anti-
spyware tools or UDF 2.5 or UDF 2.6
file system drivers of a non-standard
operating system.
If operation is unstable, check the
settings and possible conflict with the
above mentioned software, then
change the settings accordingly.
Notes
Note
