NEX-FS700 V3.10 Upgrade procedure
Firmware update procedure for Mac systems
When performing the firmware update, please use the supplied AC adapter. Update
won’t work only with battery use.
IMPORTANT: Do not remove the AC adapter during the update. Otherwise, the
camera may become inoperable due to the sudden power shutdown.
Remove the memory card from the camcorder before starting this procedure.
Step 1: download the update file
Link should have been provided to you, or you may find it on the Support tab of NEX-
FS700 camcorder website.
Please save the downloaded file onto the Desktop of your computer (recommended).
If you are using OS X v.10.10, you will also need to download and run DriverLoader
before software updates; it can be downloaded from the same Support tab.
Step 2: startup Firmware Updater
Double-click the downloaded file [DL100_1411a.dmg]. Do not connect the camera at
this point.
[DL100_1411a] folder should have appeared on the Desktop; double click on it.
Double-click the [DriverLoader] icon:
To load a kernel extension, the message prompts you to allow the application to make
changes. Type the password for the administrative account.
November 2014
abc