NW-S603/S605/S703F/S705F/S706F
9
3-6. MAIN BOARD SECTION
3-7. LITHIUM ION BATTERY, MAIN BOARD
2
sheet (wire)
1
Set the knob (JOG) to the position of FOLDER.
knob (JOG)
knob (JOG)
4
connector
(CN108)
9
connector
(CN801)
q;
MAIN board section
3
connector (CN601)
6
two screws
(B1.4)
5
SUB board
7
OLED sub assy flexible board
(CN401)
8
Peel copper leaf (tuner)
from the MAIN board.
Note: Because adhesive sheet (SUB PWB)
is attached, remove the SUB board,
not giving an excessive force.
Note: Be sure to remove the connector of a battery
before removing the flexible board of OLED
sub assy. OLED sub assy may be damaged
if the flexible board of OLED sub assy is
removed with the connector of a battery not
removed.
adhesive sheet
(SUB PWB)
Note: Adhesive sheet (battery) cannot re-used.
Please replace to brand-new part ones
adhesive sheet (battery) is removed.
Note: Adhesive sheet (connector) cannot re-used.
Please replace to brand-new part ones
adhesive sheet (connector) is removed.
2
adhesive sheet (battery)
6
holder (connector)
7
adhesive sheet (connector)
0
MAIN board
8
main PWB sheet
9
holder rear sheet (A)
1
3
spacer (line in)
4
lithium ion battery
5
two claws