GB
4
Usage Precautions
Usage
Precautions
Supported monitors
The unit is designed specifically for use
with LMD-X310 series monitors.
Do not install the unit on monitors other
than the above, as doing so may result in
smoke, fire, electromagnetic interference,
etc.
Use of power strips
prohibited
When using a power strip, increases in
leakage currents may occur due to cutoff of
the power strip’s protective earth
conductor, which may result in electric
shock. Do not connect either the monitor or
the IP converter to a power strip.
Multi-installations
Do not use the unit to install multiple IP
converters on a monitor, as doing so may
result in drops and device malfunctions.
Orientation
Always install the IP converter with its
front panel facing up and its connector
panel facing down.
Maintenance
• Clean the unit’s surface using isopropyl
alcohol with a concentration of 50% to
70% v/v or ethanol with a concentration
of 76.9% to 81.4% v/v.
• For stubborn dirt, wipe using a soft
cleaning cloth lightly moistened with a
mild detergent that has been diluted with
water, and then clean using the previous
chemical cleaning method. Do not use
benzene, thinners, acidic cleaning
solutions, alkaline cleaning solutions,
abrasive cleaning agents, chemically
treated cloths, or other volatile solvents
to clean or disinfect the unit, as doing so
may damage the unit’s surface.
Condensation
If the unit is suddenly taken from a cold to
a warm location, or if ambient temperature
suddenly rises, moisture may form on the
outer surface of the unit. This is known as
condensation. If condensation occurs, wait
until the condensation clears before using
the unit. Using the unit while condensation
is present may damage the other connected
devices.
WARNING
WARNING
