Sony NSR-1000 Series, First Step Manual

Page: 9 / 16

9
Step 2: System Setup
Specify the number of partitions, and select the
percentage of the total capacity to assign each partition.
This document assumes that you clicked [Next] with this
configuration unchanged at 100%.
↓
Set the server name, and click [Next].
↓
Configure analog camera connection settings, and click
[Next].
Select the serial connector standard to which the camera
you want to control will be connected, and configure
settings such as baud rate and parity bits.
This document assumes that you will not be controlling
pan, tilt, and zoom operations for analog cameras and,
therefore, clicked [Next] with this configuration
unchanged.
(This screen only appears when an NSR-1050H or
NSBK-A16/A16H (optional) is connected.)
↓
Select the video format for the analog cameras to be
connected, and click [Next].
(This screen only appears when an NSR-1050H or
NSBK-A16/A16H (optional) is connected.)
↓
Verify configurations, and click [Next].
↓
Click [Finish] when the restart confirmation message
appears.
↓
The unit restarts.
↓
Continue to the following section, “Step 3: Software
Setup.”