Getti
ng Sta
rted
33
Setting up the cable box/satellite receiver control
Step 7 : Setting up the cable box/satellite
receiver control
(Skip this section if you are
using Hookup 1, 2, or 3.)
Your VCR includes a cable box/satellite
receiver control feature that allows the VCR
to control cable boxes or digital satellite
receivers equipped with an infrared remote
control. With the cable box/satellite receiver
control, the VCR controls channels on the
cable box or digital satellite receiver for
timer recording. You can also use the VCR’s
remote commander to change channels on
the cable box or digital satellite receiver
whenever the cable box or digital satellite
receiver is turned on even if the VCR is
turned off. To use cable box/satellite receiver
control, you need to set the code number and
output channel.
This VCR is programmed with codes
necessary to control channel selection on
most brands of cable boxes or digital satellite
receivers at the time this VCR was
manufactured. It is possible that new cable
boxes may be introduced that cannot be
controlled with this VCR. If you have a
cable box that is incompatible with this VCR,
contact your cable operator—they may be
able to provide you with a compatible cable
box.
1
Press MENU.
1
2
3
4
5
6
7
8
9
0
MENU
M
/
m
OK
MENU
Select
:
Set
:
MAIN MENU
OK
Vv
Clock set
Timer set / check
Tuner preset
Advanced options
Language / Idioma / Langue
: MENU
Quit
Cable Box / Sat. Control
continued
Summary of Contents for N900 - SLV - VCR
Page 83: ......
