Sony MVS-8000X SystemMVS-7000X System, User Manual

Page: 487 / 706

USO
RESTRITO
Utility Execution
487
Ch
a
p
te
r 15
Ut
ility
/S
h
o
tb
o
x
Utility/Shotbox
Chapte
1
r
5
Utility Execution
•
For other actions, the button you pressed momentarily
lights amber, and then the function is executed.
The utility function refers to a function whereby you can
assign an arbitrary action or a shortcut for frequently used
menu to a particular button, then instantly recall the action
or menu by pressing the button.
The functions you can assign include menu shortcuts,
enabling/disabling functions (recalling utility commands),
and recalling (shotbox registers or macro registers).
Carry out the button assignment in the Setup menu.
For details of the operation, see “Setting Button
Assignments (Prefs/Utility Menu)” (page 589).
Executing a Utility in the Utility/ Shotbox Control Block
Bank selection buttons
You can execute the utility functions from the following
blocks.
•
Utility/shotbox control block (page 487)
•
Cross-point control block (page 488)
•
User preference buttons in the menu control block (page
487)
For details of the settings for assigning functions to
buttons, see “Setting Button Assignments (Prefs/Utility
Menu)” (page 589).
Executing a Utility With the User
Preference Buttons (Menu Control
Block)
In the setup menu, you can assign any 16 actions to the user
preference buttons in the menu control block.
To execute an assigned action
Press the corresponding user preference button ([PREFS
1] to [PREFS 16]).
•
In the case of a function on/off action, the button you
pressed lights amber, and this enables the function.
To disable the function, press the button once more.
Memory recall buttons
Utility/shotbox control block
By default, the memory recall buttons in the utility/
shotbox control block are assigned to shotbox registers 1 to
96, in banks 1 to 4
(see page 494) , but in the setup menu,
you can assign these to any 96 actions.
To execute an assigned action
When the action is to execute a shotbox register, follow the
procedure in “Shotbox Execution in the Utility/Shotbox
Control Block” (page 494).
1
Press one of the bank selection buttons [BANK1] to
[BANK4] to select a bank.
•
The bank selection button you pressed lights amber.
•
For the selected bank, the memory recall buttons
show the button numbers and corresponding button
states. If a button has been given a name in the setup
menu, this name appears.