Test Instructions (mech)
1262-4098 Rev 1
© Sony Mobile Communications AB – Company Internal
11(22)
Tests: Service Tests
2.2.13 Flash LED
Check the Flash LED at the back side of phone to see
whether it’s turned on.
Press the Back key to return to the Service Test Menu.
XPERIA
2.2.14 Bluetooth
During this test, the distance between the phone and
the target Bluetooth device must be 1.5 to 5 meters!
Make sure the target Bluetooth device is enabled and
visible always!
The Bluetooth test will be done in following sequences:
Step 1: Enable Bluetooth; wait 4-5 seconds, shows OK;
Step 2: Searching;
Step 3: Press "Yes" to setup its visibility to target;
SONY
XPERIA
An application on your phone is
requesting permission to turn on
Bluetooth and to make your phone
discoverable by other devices for 300
seconds. Do you want to do this?
Yes
No
Bluetooth permission request
i
Bluetooth
Enable Bluetooth OK
Searching
Device found
Step 4: Select the Target Bluetooth Device;
Step 5: Bluetooth paring request shows, verify the passcode
and select "Pair" to confirm it;
SONY
XPERIA
To pair with “ST25”, confirm that it is
showing the passcode: xxxxxx.
Pair
Don’t pair
Bluetooth pairing request
i
Bluetooth
Enable Bluetooth OK
Searching
Device found
