Sony MT10, Instruction Manual

Page: 10 / 16

2 (E)
L
Specifications
Model
MT10/MT11
Item
Connected scale unit DT12N/DT12P
Resolution 5
µ
m
Maximum response speed 60 m/min
Maximum response acceleration 2400 m/s 2
Cable length 0.3 m/0.98 ft
Power voltage DC5 V
±
4%
Power consumption 0.7 W (MT10), * 1 W (MT11)
Operating temperature 0 to 50
°
C/32 to 122
°
F
Strage temperature –10 to 60
°
C/14 to 140
°
F
Mass About 90 g
Supplied accessories Instruction manual
Cable color Signal
Red Power 5V
White Power supply 0V
Brown Power supply 0V
Black Power supply 0V
Yellow A
Blue A
Gray B
Orange B
Purple ALARM
Green ALARM
Shield FG
L
MT11 cable color
L MT11 output specifications
Output signal : A/B phase, Alarm
Output format : Differential line driver (equivalent to EIA-422)
Phase A/Phase B phase difference : Changes as follows according to the travelling velocity of the scale unit.
(Sampling is performed every 120
µ
s.)
Travelling velocity : v [m/min] Phase difference : T [
µ
s]
0
＜
v
＜
12.5 20.0
12.5 ≦ v ＜ 32.5 8.8
32.5 ≦ v ≦ 60.0 4.5
Alarm signal : This signal is output when the response acceleration is
exceeded or when a scale unit is not connected. The minimum
output pulse width is 10 ms, and the alarm output signal also
recovers automatically when the alarm status is canceled.
L Optional Accessories
Extension cable
(These are extension cables for use between scale unit and the detector.)
CE08-1 (1 m)
CE08-3 (3 m)
CE08-5 (5 m)
CE08-10 (10 m)
CE08-15 (15 m)
Specifications and appearances of the products are subject to change without notice because of improvement.
•
Power supply 0V (white, brown and black) and
the shield are connected with a capacitor.
(isolated with respect to DC)
*
The power consumption of 1 W marked with
MT11 stands for the output to a differential output
load of 120
Z .