manualshive.com logo in svg

Sony MSW-M2100, Operation Manual

Share
Download
Sony MSW-M2100 Operation Manual Download Page 108

Chapter 13

Maintenance and Inspection

13-1

Chapter 13

Maintenance and Inspection

13-1  Removing a Cassette When Tape Slack Occurs

If tape slack occurs in the unit, it is necessary to
remove the upper lid and sound baffle.  This job
should always be entrusted to a technician who has
undergone service training.

To clean the video heads and audio heads, always use
the special-purpose Sony BCT-HD12CL cleaning
cassette.
If you insert the cleaning cassette, it is automatically
ejected after a head cleaning operation which lasts for
5 seconds.
Follow the instructions with the cleaning cassette
carefully, as inappropriate use of the cleaning cassette
can damage the heads.

For details, refer to Section 1-17 in the Installation Manual.

13-2  Head Cleaning

Notes

• When carrying out head cleaning without using the

automatic cleaning function, be sure to eject the
cleaning cassette after use in order not to damage the
heads.

• You cannot use the BCT-5CLN cleaning cassette.

Chapter 13

Maintenance and Inspection

Summary of Contents for MSW-M2100




























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands