P
5
-EN
EN
F
ES
On maintenance
After recording in the sea, submerge the marine pack with the buckles tightly fastened
in fresh water for a while to remove the sea water. Then rinse it with fresh water and
wipe it with a soft cloth.
• Every time you use the marine pack and the video camera recorder underwater,
clean the video camera recorder and the inside of the marine pack with a dry soft
cloth. Do not use any type of solvent, such as alcohol or benzine for cleaning, as this
may damage the finish.
• If water comes between the rear shell and the rubber part, remove the rubber and
clean it with a dry soft cloth.
When you store the marine pack
• Coat the O-ring slightly with the supplied grease, and put it in the groove correctly.
Join the front and rear shells then put in a cool place without fastening the buckles.
• Prevent dust from collecting on the O-ring.
• Avoid storing the marine pack in a cold, very hot or humid place, or together with
naphthalene or camphor, as these conditions might damage the unit.
On transportation
• When transporting the marine pack, be sure to remove the video camera recorder
from the marine pack.
• When transporting the marine pack by air or by car, use a marine pack carrying case
(not supplied).
Summary of Contents for MPK-TRV3
