MHS-TS22
1-3
1-3. WATER-PROOF INSPECTION TOOL
1-3-1. Water-proof Inspection Tool
There are two types of the air-leak tester, hand pump type and compressor type. Use either between two types.
VACUUM PAD
J-6082-734-2
HAND VACUUM PUMP
J-6082-734-1
Vacuum pad and hand vacuum pump are parts for
repair, and they are included in air-leak tester.
AIR-LEAK TESTER (COMPRESSOR TYPE)
J-6082-733-A
AIR-LEAK TESTER (HAND PUMP TYPE)
J-6082-734-A
Note :
A
Check the unit status.
EIs the unit deformed?
EIs any foreign object present in the water-stopping area?
EIs the waterproof packing deformed?
EIs any scratch or crack present on exterior parts?
EIs there any trance of immersion?
No
OK
Yes
Yes
Clean the waterproof packing.
Unrepairable
Remove foreign object from the
water-stopping area, replace exterior
parts/waterproof parts, etc.
When the unit cannot be repaired,
take individual measures.
(Conforming to warranty provisions/area
judgment)
(Note 2)
Judge whether the unit is repairable or not based on the repair standard
at each depot.
Repairable?
(Note 2)
No
Normal repair
Judge by Air-leak test
NG
Check waterproof
parts.
END
Yes
Replace waterproof parts.
Ask the customer
about whether to replace
waterproof parts.
(Note 1)
No
(Note 1)
Explain the necessity of replacing waterproof parts to the customer.
When approval is gained from the customer, replace waterproof parts.
