MHS-TS22
1-2
1-1-2. REGARDING THE POSITIONS OF WATER-PROOF TREATMENT
The positions of water-proof treatment are as shown below;
Lens Clear Plate
(including Front
Cover Sub Assy)
LCD & Touch Panel
(including Rear Cover (+LCD) Assy)
Light Cover
(including Front
Cover Sub Assy)
SW Key Rubber
(including Rear Cover
(+LCD) Assy)
USB Door Rubber
Rear Cover O Ring
Tripod O Ring
Sheet
(including Rear Cover
(+LCD) Assy)
Sheet
(including Rear Cover
(+LCD) Assy)
Sheet
(including Rear Cover
(+LCD) Assy)
P Button
Rubber
Note:
• It may cause the water leak that assemble with attached the dust to the
Packing Cabinet.
Assemble after confirm that there is no dust on the Packing Cabinet.
• It may cause the water leak that the adhesive paper is not attached certainly.
Confirm that the there is no crinkle when attaching, there is no dust on the
Packing Cabinet and perform the clamping certainly.
1-2. SERVICING FLOW
This repair flow is an example and is not compulsory.
Modify this flow as needed according to the repair standard
and other necessary documents for each area.
To maintain the waterproof performance of this unit, annual
replacement (charged) of the waterproof packing is recom-
mended in the user’s manual and other documents.
START
Within one year
from purchase?
No
Was a problem
on immersion
indicated?
No
Yes
No
OK
Is there any
trance of immersion
on the unit?
Yes
No
No
OK
Is there any
trance of immersion
on the unit?
Judge by Air-leak test
Judge by Air-leak test
Judge by Air-leak test
Normal repair start
Normal repair end
A
Yes
NG
Yes
A
Check waterproof
parts.
Yes
Replace waterproof
parts.
NG
Check waterproof
parts.
Ask the customer
about whether to replace
waterproof parts.
(Note 1)
END
Normal repair start
Normal repair end
NG
OK
(Note 1)
Explain the necessity of replacing waterproof parts to the customer.
When approval is gained from the customer, replace waterproof parts.
