6
Step 2: Setting the time
You must set the time before using the timer
functions.
The clock is on a 24-hour system for the European
model, and on a 12-hour system for other models.
For illustration purposes, the 24-hour system
model is used.
1
Press MODE SELECT when the system
is turned off.
“Clock Set ?” appears.
When the system is in the Power Saving
Mode, “Clock Set ?” will not appear. Either
set Power Saving Mode off, or follow the
steps on the following page (“To change the
time”) after turning the power on.
2
Press PUSH ENTER.
The hour indication flashes.
?/1
(Power)
1
To attach the front speaker pads
Attach the supplied front speaker pads to the
bottom of the speakers to stabilize the speakers
and prevent them from slipping.
Inserting two size AA (R6)
batteries into the remote
}
}
]
]
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates the
system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage.
When carrying this system
Do the following to protect the CD mechanism.
Make sure that all discs are removed from the
unit.
1
Press FUNCTION repeatedly until “CD”
appears in the display.
2
Hold down V-GROOVE and press
?/1
so that
“LOCK” appears in the display.
Step 1: Hooking up the system
(continued)
2,3,4,5,6
Summary of Contents for MHC-ZX10 - Mini Hifi Component System
Page 57: ...57 Additional Information ...
Page 58: ...58 ...
Page 59: ...59 Additional Information ...