![background image](http://html.mh-extra.com/html/sony/mhc-wz88d/mhc-wz88d_operating-instructions-manual_1330155063.webp)
T
a
p
e
– Reco
rd
in
g
63
GB
Notes
• You can only record the tracks on the CD layer of a
Super Audio CD when you make CD Synchro
Recording.
• You cannot listen to other sources while recording.
• When you press CD SYNC, the sound field is
automatically changed to LINK if the headphones
are not connected and HP 2CH if the headphones are
connected.
• CD Synchro Recording stops when the currect disc
finishes playback.
• CD Synchro Recording cannot function in the
following conditions:
– during playback of the disc.
– the on-screen display is showing the password
input of parental control display.
– before the system finishes reading the Table of
Contents (TOC) of the disc.
• When CD Synchro Recording starts,
– the setting for Repeat Play changes to “REPEAT
OFF”.
– Program Play and Shuffle Play is canceled.
• When you record from a VIDEO CD, PBC playback
is automatically canceled.
• When you connect or disconnect a microphone or
headphones during recording, the sound may cut off
for a moment.
Tips
• When recording from the reverse side:
After step 1 of “Recording your favorite disc onto a
tape”, press TAPE A/B repeatedly until “TAPE B”
appears in the display. Press
hH
repeatedly until
the TAPE B reverse side indicator lights up to start
playback of the reverse side. Press
x
at the point you
want to start recording.
• When recording on both sides:
Be sure to start from the front side. If you start from
the reverse side, recording stops at the end of the
reverse side.
You can record just the portions you like from a
disc, tape or radio program onto a tape.
You can also record from the connected
components (see “Hooking up optional
components” on page 80).
Use the buttons on the unit for the operation.
1
Load a recordable tape into deck B.
2
Press DVD, TAPE A/B, TUNER/BAND or
VIDEO/SAT to select the source you
want to record.
3
Load the disc, tape or tune to the
station you want to record. To record
from the connected component,
connect the external audio sources.
4
Press REC PAUSE/START.
“REC” flashes in the display.
Deck B stands by for recording.
5
Press DIRECTION repeatedly to select
“
g
” to record on one side or “
j
”
(or “RELAY”) to record on both sides.
6
Press REC PAUSE/START.
“REC” lights up in the display.
Recording starts.
7
Start playing the source to be
recorded.
To stop recording
Press
x
.
Recording onto a tape
manually
— Manual Recording
continued