56
4
Set the time to start recording.
Turn the jog dial to set the hour, then
press ENTER/NEXT.
The minute indication starts flashing.
Turn the jog dial to set the minute, then
press ENTER/NEXT.
The hour indication flashes again.
5
Set the time to stop recording
following the above procedure.
The start time appears, followed by the
stop time, the preset radio station to be
recorded (e.g., “TUNER FM 5”), then the
original display appears.
6
Insert a blank tape into deck B.
7
Turn off the power.
When the recording starts, the volume
level is set to the minimum.
To check the setting
Press TIMER SELECT and turn the jog dial to
select “REC”, then press ENTER/NEXT.
To change the setting, start over from step 1.
To cancel the timer operation
Press TIMER SELECT and turn the jog dial to
select “TIMER OFF”, then press ENTER/
NEXT.
Note
If the power is on at the preset time, the recording
will not be made.
1
Tune in the preset radio station (see
“Listening to the radio”).
2
Press CLOCK/TIMER SET.
“SET (DAILY 1)” appears.
3
Turn jog dial to select REC, then
press ENTER/NEXT.
“ON” appears and the hour digits flash
in the display.
To timer-record, you must preset the radio
station (see “Step 3: Presetting radio
stations”) and set the clock (see “Step 2:
Setting the time”) beforehand.
6
3,4,5
2
7
Timer-recording radio
programs
1 2
REC
SLEEP
VOLUME
ALL DISCS
ß
1 2
REC
SLEEP
VOLUME
ALL DISCS
ß
TIMER
SELECT
