Basic Operations
17
Tips
• Pressing CD
(P
when the power is off
automatically turns the power on and starts CD
playback if there is a CD in the tray (One Touch
Play).
• You can switch from another source to the CD
player and start playing a CD just by pressing
CD
(P
or the DISC 1~3 buttons (Automatic
Source Selection).
• If there is no CD in the player, “CD NO DISC”
appears in the display.
• When a disc tray holding a CD is selected (or
playing), the DISC 1~3 button for that tray lights
green. When a disc tray holding a CD is not
selected, the DISC 1~3 button for that tray lights
orange. When all disc trays are empty, the DISC
1~3 buttons all light green.
To
Do this
Stop play
Press
p
.
Pause
Press CD
(P
(or
P
on the
remote). Press again to resume
play.
Select a track
During play or pause, turn the
jog dial clockwise (to go
forward) or counterclockwise
(to go back) and release it
when you reach the desired
track. (Or press
+
(to go
forward) or
=
(to go back)
on the remote.)
Find a point in a Press
0
or
)
during
track
playback.
(Lock Search
Press CD
(P
to stop
function)
searching at the desired point.
Select a CD
Press a DISC 1~3 button or
in stop mode
DISC SKIP/EX-CHANGE (or
D.SKIP on the remote).
Play only the
Press PLAY MODE
CD you have
repeatedly until “1 DISC”
selected
appears.
Play all CDs
Press PLAY MODE repeatedly
until “ALL DISCS” appears.
Remove the CD Press
§
.
Exchange other
Press DISC SKIP/
CDs while
EX-CHANGE.
playing
Adjust the
Turn VOLUME (or press VOL
volume
+/– on the remote).
