![background image](http://html.mh-extra.com/html/sony/mhc-v50/mhc-v50_service-manual_1330113006.webp)
MHC-V50/V50D
6
NOTE OF REPLACING MOTHERBOARD BOARD OR
BLUETOOTH MODULE OR RC-S730 (WW) BOARD
When the MOTHERBOARD board or BLUETOOTH module or
RC-S730 (WW) board are replaced, please execute the below
service mode.
Pairing this system with a
Bluetooth device
1. Press the [
1
] button to turn the power on.
2. Place the
Bluetooth
device within 1 meter (3 feet) from the
system.
3. Touch BLUETOOTH on the unit to select
Bluetooth
function.
“BT AUDIO” appears on the display.
Hint
• When there is no pairing information on the system, “PAIR-
ING”
fl
ashes on the display and the system enters the pairing
mode. Proceed to step 5.
• If the system is connected to a BLUETOOTH device, touch
BLUETOOTH on the unit to disconnect the BLUETOOTH
device.
4. Touch and hold
PAIRING on the unit for 2 seconds or more.
“PAIRING”
fl
ashes in the display panel.
5. Perform the pairing procedure on the
Bluetooth
device.
6. Select model’s name on the display of the
Bluetooth
device.
For example, select “MHC-V50 or MHC-V50D”. If passkey
is required on the
Bluetooth
device, enter “0000”.
7. Perform
the
Bluetooth
connection on the
Bluetooth
device.
8. When pairing is completed and the
Bluetooth
connection
is established, the
Bluetooth
device name appears on the
display.
9. To cancel pairing operation, touch and hold
PAIRING on
the unit for 2 seconds or more until “BT AUDIO” appears on
the display.
Connecting with a smartphone by one touch (NFC)
Note:
The operation in this mode must use a NFC-compatible smartphone
(Smartphones with a built-in NFC function [OS: Android 2.3.3 or
later, excluding Android 3.x])
1. Press the [
1
] button to turn the power on.
2. Download and install the app “NFC Easy Connect”.
Download the free Android app from Google Play by searching
for “NFC Easy Connect”.
3. Start the app “NFC Easy Connect” on the smartphone.
Make sure that the application screen is displayed.
4. Touch the smartphone to the N-Mark on the system until the
smartphone vibrates.
Complete the connection by following the instructions
displayed on the smartphone.
5. When pairing is completed and the
Bluetooth
connection is
established, the
Bluetooth
device name appears on the display.
Playing music from a
Bluetooth device
For a Bluetooth device
1. Press the [
1
] button to turn the power on.
2. Touch BLUETOOTH on the unit to select
Bluetooth
function.
“BT AUDIO” appears on the display.
3. Establish connection with the
Bluetooth
device.
Touch BLUETOOTH on the unit to connect to the last
connected
Bluetooth
device.
Perform
the
Bluetooth
connection from the
Bluetooth
device if
the device is not connected.
Once the connection is established, the
Bluetooth
device name
appears on the display.
4. Touch
N
.
Depending on the
Bluetooth
device,
– you may have to touch
N
twice.
– you may need to start playback of an audio source on the
Bluetooth
device.
For an NFC-compatible smartphone
1. Press the [
1
] button to turn the power on.
Touch the smartphone to the N-Mark on the system to establish
the
Bluetooth
connection.
Start playback of an audio source on the smartphone. For
details on playback, refer to the operating instructions of your
smartphone.
To disconnect the Bluetooth device
For a Bluetooth device
Touch BLUETOOTH on the unit.
“BT AUDIO” appears on the display.
For an NFC-compatible smartphone
Touch the smartphone to the N-Mark on the system again.
To erase all the pairing registration information perform
BLUETOOTH PAIRING HISTORY CLEAR test mode
(Refer page 24).