![background image](http://html.mh-extra.com/html/sony/mhc-v4d/mhc-v4d_operating-instructions-manual_1330110046.webp)
model name [MHC-V4D]
[4-540-486-
12
(1)] GB
46
GB
filename[D:\NORM'S JOB\SONY HA\SO140051\MHC-V4D_PMRF
02\4540486121_GB\090INF.fm]
masterpage:Left
• Check the information on the website
about compatible USB devices
(page 10).
• The USB device does not work
properly. Refer to the operating
instructions of the USB device on how
to deal with this problem.
Playback does not start.
• Turn off the system and reconnect the
USB device, then turn on the system.
• Check the information on the website
about compatible USB devices
(page 10).
Playback does not start from the first
file.
• Set the play mode to Normal Play
Files cannot be played back.
• The JPEG image file is larger than
3,072 (width) × 2,048 (height) in normal
mode, or more than 3,300,000 pixels in
Progressive JPEG mode which is
mainly used on the Internet website.
• JPEG image files with a high width to
length ratio cannot be played back.
• Make sure you have selected the correct
Media Mode before playback.
• USB devices formatted with file
systems other than FAT16 or FAT32 are
unsupported.*
• A WMA audio file that is created in the
WMA DRM, WMA Lossless, or WMA
PRO format cannot be played back.
• An AAC audio file that is created in the
AAC DRM or AAC Lossless format
cannot be played back.
• AAC audio files encoded at 96 kHz
cannot be played back.
• If you use a partitioned USB device,
only files on the first partition can be
played back.
• The system can play back to a depth of
8 folders only.
• The number of folders has exceeded
300.
• The number of files has exceeded 2,000.
• Files that are encrypted or protected by
passwords cannot be played back.
• Files with DRM (Digital Rights
Management) copyright protection
cannot be played back by this system.
• The MP3 PRO audio file can be played
back as MP3 audio file.
* This system supports FAT16 and FAT32, but
some USB devices may not support all of
these FAT. For details, refer the operating
instructions of each USB device or contact the
manufacturer.
Picture
There is no picture.
• Check that the system is connected
securely.
• If the video cord is damaged, replace it
with a new one.
• Make sure you connect the unit to the
video input jack of your TV (page 15).
• Make sure you turn on the TV and
operate the TV correctly.
• Make sure you select the video input on
the TV so that you can view the pictures
from the system.
• (Except for Latin American model)
Make sure you set the color system
correctly, according to your TV’s color
system.
Picture noise appears.
• Wipe the disc clean (page 50).
• If video signal from your system has to
go through your VCR to your TV, the
copy-protection applied to some DVD
VIDEO programs could affect the
picture quality.
• (Except for Latin American model)
When you play back a VIDEO CD
recorded in a different color system
from the one you set to the system, the
picture image may be distorted
(pages 17, 28).
• (Except for Latin American model) Set
the color system to match your TV
(pages 17, 28).