![background image](http://html.mh-extra.com/html/sony/mhc-v44d/mhc-v44d_service-manual_1330109007.webp)
MHC-V44D
7
Playing music from a
Bluetooth device
For a Bluetooth device
1. Press the [
1
] button to turn the power on.
2. Press BLUETOOTH on the unit to select
Bluetooth
function.
“BT AUDIO” appears in the display panel.
3. Establish connection with the
Bluetooth
device.
Press BLUETOOTH on the unit to connect to the last
connected
Bluetooth
device.
Perform
the
Bluetooth
connection from the
Bluetooth
device if
the device is not connected.
Once the connection is established, the
Bluetooth
device name
appears in the display panel.
4. Press
N
.
Depending on the
Bluetooth
device,
– you may have to press
N
twice.
– you may need to start playback of an audio source on the
Bluetooth
device.
For an NFC-compatible smartphone
1. Press the [
1
] button to turn the power on.
Touch the smartphone to the N-Mark on the system to establish
the
Bluetooth
connection.
Start playback of an audio source on the smartphone. For
details on playback, refer to the operating instructions of your
smartphone.
To disconnect the Bluetooth device
For a Bluetooth device
Press BLUETOOTH on the unit.
“BT AUDIO” appears in the display panel.
For an NFC-compatible smartphone
Touch the smartphone to the N-Mark on the system again.
To erase all the pairing registration information perform
COLD RESET test mode (Refer page 23).
BOND FIXATION OF ELECTRIC PARTS
When DAMP board or SMPS board are replaced, it is necessary to
fi x parts to the boards by using a specifi ed bond without fail.
• Object boards
1.
Complete DAMP board
2.
Complete SMPS board
• Use bond
HM-40 (E318202) 300ML
• Parts position
1.
DAMP board (page 7)
2.
SMPS board (page 7)
1. DAMP
board
2. SMPS
board
– DAMP Board (Component Side) –
The portion which applies bond:
C2076
– SMPS Board (Component Side) –
The portion which applies bond:
C905
C914
VDR901
C992
C2010
C917
R998
R996
C1003
A932
A933