![background image](http://html.mh-extra.com/html/sony/mhc-v13/mhc-v13_help-manual_1330097048.webp)
Synchronization of settings in a Wireless Party Chain
When a Wireless Party Chain has been established, the following settings on the Party Host and Party Guests are
changed:
The MEGA BASS settings on Party Guests are synchronized with the Party Host.
The Karaoke setting (Vocal Fader, Key Control and Mic Echo) on both Party Host and Party Guests is turned off.
Connect the second system within 1 minute. After 1 minute or more, the system setting is canceled.
[HOST] appears on the display of the first system.
[GUEST XX]
*
appears on the display of the second or subsequent system.
XX indicates the number that is assigned to the device connected as the Party Guest.
*
To connect additional systems, repeat steps
– 1 and
– 2.
Hint
When connecting a third or subsequent systems, connect each one within 30 seconds of connecting the previous
system. After 30 seconds or more, the system cannot be connected.
If you want to add another system after connecting (30 seconds or more), hold down W. PARTY CHAIN on the first
system, then operate steps
– 1 and
– 2.
3.
Wait 30 seconds after the last Party Guest is connected.
[P.CHAIN] stops flashing on the display of the Party Host and the BLUETOOTH device reconnects to the Party
Host.
4
Start playback on the BLUETOOTH device.
Start playback on the connected BLUETOOTH device and adjust the volume.
The same music is played from all systems.
When adjusting the volume on the BLUETOOTH device or the Party Host, the volumes of the Party Guests are
automatically adjusted.
*
For the Party Guests, you can also adjust the volume on each other.
5
Depending on the connected device, the volume may not be synchronized with the volume you adjusted on the Party Host.
*
48