Home Audio System
MHC-V02
About messages
One of the following messages may appear or flash on the display during operation.
4-748-045-11(1) Copyright 2019 Sony Corporation
Message
Cause
CANNOT PLAY
A disc that cannot be played back was inserted.
DATA ERROR
The file is created in unsupported format.
The file extension does not match the file format.
DEVICE ERROR
The USB device could not be recognized or an unknown device is connected.
DEVICE FULL
The memory of the USB device is full.
ERASE ERROR
Erase of audio files or folders on the USB device failed.
FATAL ERROR
The USB device was removed during transfer or erase operation, and may have been damaged.
FOLDER FULL
You cannot transfer onto the USB device because the number of folders has reached its
maximum.
NoDEVICE
No USB device is connected or unsupported device is connected.
NO DISC
There is no disc in the system.
NO MUSIC
No supported audio files exist in the playback source.
NO SUPPORT
An unsupported USB device is connected, or the USB device is connected through a USB hub.
NOT USE
You tried to perform a specific operation under conditions where that operation is prohibited.
OVER
CURRENT
An over current from the
(USB) port was detected.
PROTECT
The USB device is write-protected.
PUSH STOP
You tried to perform an operation that can be performed only when the playback is stopped.
READING
The system is reading information of the disc or USB device. Some operations are not available.
REC ERROR
The transfer did not start, stopped partway, or otherwise could not be performed.
TRACK FULL
You cannot transfer onto the USB device because the number of files has reached its maximum.
72
