background image

21

GB

Disc

Other operations

Tips

• The program you made remains in the 

system’s memory even after it has been 
played back. Press 

NX

 

(or 

N

 

on the 

remote) to play back the same program again.

• If “--.--” appears instead of the total playing 

time during programming, this means:
– you have programmed a track in an AUDIO 

CD with track number exceeds 20.

– the total playing time has exceeded 100 

minutes.

– you have programmed an MP3 audio track.

— Repeat Play

You can play back all the tracks or a 
single track on a disc repeatedly.

Press REPEAT on the remote 
repeatedly during playback until 
“REP” or “REP 1” lights up in the 
display.

• REP: All the tracks on the disc(s), or all 

the tracks in the folder* are played back 
repeatedly up to five times.

• REP 1: A single track is played back 

repeatedly until “REP 1” is canceled.

* When “

” or “

 SHUF” is selected for 

MP3 audio tracks.

To cancel Repeat Play

Press REPEAT on the remote repeatedly 
until both “REP” and “REP 1” disappear 
from the display.

Note

You cannot select “REP” and “ALL DISCS 
SHUF” at the same time.

To

Do this

Cancel Program 
Play

When playback is 
stopped, press PLAY 
MODE on the remote 
repeatedly until “PGM” 
disappear from the 
display.

Delete the last step 
from the program 
list

Press CLEAR on the 
remote when playback is 
stopped.

Playing repeatedly

Summary of Contents for MHC-GTX66

























































Reviews: