background image

2

GB

To reduce the risk of fire or 
electric shock, do not expose 
this apparatus to rain or 
moisture.

To prevent fire, do not cover the ventilation 
of the apparatus with newspapers, table-
cloths, curtains, etc. And don’t place lighted 
candles on the apparatus.

To prevent fire or shock hazard, do not place 
objects filled with liquids, such as vases, on 
the apparatus.

To avoid electrical shock, do not open the 
cabinet. Refer servicing to qualified 
personnel only.

Batteries or batteries installed apparatus 
shall not be exposed to excessive heat such 
as sunshine, fire or the like.

Do not install the appliance in a confined 
space, such as a bookcase or built-in cabinet.

Install this system so that the power cord can 
be unplugged from the wall socket 
immediately in the event of trouble.

This appliance is classified as a CLASS 1 
LASER product. This label is located on the 
rear exterior.

Don’t throw away the 
battery with general 
house waste, dispose of it 
correctly as chemical 
waste.

About this manual

The instructions in this manual are for 
models MHC-GTX88, MHC-GTX77 and 
MHC-GTX66. In this manual, the 
MHC-GTX88 is used for illustration 
purposes unless stated otherwise.

The MHC-GTX88 consists of:

– Unit

HCD-GTX88

– Speaker System

• Front speakers

SS-GTX88

• Surround speakers SS-RSX88
• Subwoofer A

SS-WG88A

• Subwoofer B

SS-WG88B

The MHC-GTX77 consists of:

– Unit

HCD-GTX77

– Speaker System

• Front speakers

SS-GTX77

The MHC-GTX66 consists of:

– Unit

HCD-GTX66

– Speaker System

• Front speakers

SS-GTX66

“WALKMAN” and “WALKMAN” logo are 
registered trademarks of Sony Corporation.

MICROVAULT is a trademark of Sony 
Corporation.

MPEG Layer-3 audio coding technology and 
patents licensed from Fraunhofer IIS and 
Thomson.

WARNING

Summary of Contents for MHC-GTX66

























































Reviews: