Sony MHC-GTR6 Operating Instructions Manual Download Page 3

Page: 3 / 60

“WALKMAN” and “WALKMAN” logo are
registered trademarks of Sony Corporation.

MICROVAULT is a trademark of Sony
Corporation.

MPEG Layer-3 audio coding technology and
patents licensed from Fraunhofer IIS and
Thomson.

Windows Media is a registered trademark of
Microsoft Corporation in the United States
and/or other countries.

“Memory Stick” is a trademark of Sony
Corporation.

About this manual

The instructions in this manual are for
models MHC-GTR8, MHC-GTR7,
MHC-GTR6 and MHC-GTR6H. In this
manual, the MHC-GTR8 is used for
illustration purposes unless stated
otherwise.

The MHC-GTR8 consists of:

– Unit

Latin American and Mexican models
only

HCD-GTR8

Other models

HCD-GTR8B

– Speaker System

Latin American and Mexican models
only
• Front speakers

SS-GTR8

• Surround speakers SS-RSR8
• Subwoofers

SS-WGR8

Other models
• Front speakers

SS-GTR8B

• Surround speakers SS-RSR8B
• Subwoofers

SS-WGR8B

The MHC-GTR7 consists of:

– Unit

Latin American and Mexican models
only

HCD-GTR7

Other models

HCD-GTR7B

– Speaker System

Latin American and Mexican models
only
• Front speakers

SS-GTR7

• Surround speakers SS-RSR7
• Subwoofer

SS-WGR7

Other models
• Front speakers

SS-GTR7B

• Surround speakers SS-RSR7B
• Subwoofer

SS-WGR7B

Continued

Summary of Contents for MHC-GTR6





























































Search results

Summary of Contents for MHC-GTR6

Reviews:

Brands by name

Popular brands

Sony MHC-GTR6, Operating Instructions Manual

Search results

Summary of Contents for MHC-GTR6

Reviews:

Brands by name

Popular brands