background image

model name [MHC-GTR88]

[4-165-654-

71

(1)] GB

47

GB

Ad
d

iti

on
al

 I

n

fo

rmatio

n

filename[D:\shared_Chinmeng\NORMAN-PDF only\GB\GB080ADD.fm]

masterpage:Right

STEP FULL

You tried to program more than 25 steps.

UNLOCK

 

The disc theft-preventive function is 
released.

* For African and Pan Asian models only

USB device

DATA ERROR

 

You tried to play a file that is not playable.

DEVICE ERROR

 

The USB device could not be recognized 
or an unknown device is connected 
(page 43).

DEVICE FULL

 

The memory of the USB device is full.

FATAL ERROR

 

The USB device was removed during 
transferring or erase operation, and may 
have been damaged.

FOLDER FULL

 

You cannot transfer onto the USB device 
because the number of folders have 
reached its maximum.

NO DEVICE

 

The USB device is not connected.

NO MEMORY

 

External device is not inserted in mobile 
phone.

NO STEP

 

All of the programmed steps have been 
erased.

NO TRACK

 

No playable file is loaded in the system.

NOT IN USE

 

You tried to perform a specific operation 
under conditions where that operation is 
prohibited.

NOT SUPPORTED

 

An unsupported USB device is connected, 
or the USB device is connected through 
an USB hub.

OVER CURRENT

 

An over current was detected.

PROTECTED

 

The USB device is write-protected.

PUSH STOP

 

You tried to perform an operation that can 
be performed only when the system is 
stopped.

READING

 

The system is reading information of the 
USB device. Some buttons are not 
available.

REC ERROR

 

Transferring did not start, stopped 
partway, or otherwise could not be 
performed (page 42).

STEP FULL

 

You tried to program more than 25 steps.

TRACK FULL

 

You cannot transfer onto the USB device 
because the number of files have reached 
its maximum.

Summary of Contents for MHC-GTR33

























































Reviews:

Related manuals for MHC-GTR33