background image

model name [MHC-GTR88]

[4-165-654-

71

(1)] GB

17

GB

Getting Star

ted

filename[D:\shared_Chinmeng\NORMAN-PDF only\GB\GB05CON.fm]

masterpage:Right

Positioning the Line Array Speaker 
System

A

Unit

B

Front speaker (left)

C

Front speaker (right)

D

Satellite speaker (left)

E

Satellite speaker (right)

F

Subwoofer (left)

G

Subwoofer (right)

Notes

• For maximum listening effect, we recommend 

you to place the speakers with the horn near to 
the unit.

• Place the speakers at least 0.3 meter away 

from the unit.

Setting the clock

You cannot set the clock in Power Saving 
Mode.
Use the buttons on the remote for this 
operation.

1

Press 

"/1

 to turn on the system.

2

Press CLOCK/TIMER SET.

If “PLAY SET” appears on the 
display, press 

.

/

repeatedly to 

select “CLOCK SET” and then press 
ENTER.

3

Press 

.

/

>

 repeatedly to set 

the hour, and then press ENTER.

4

Press 

.

/

>

 repeatedly to set 

the minutes, and then press 
ENTER.

Note

The clock settings are cancelled when you 
disconnect the power cord or if a power failure 
occurs. 

To display the clock when the 
system is turned off

Press DISPLAY repeatedly until the clock 
is displayed. The clock is displayed for a 
few seconds.

Summary of Contents for MHC-GTR33

























































Reviews: