![background image](http://html.mh-extra.com/html/sony/mhc-gr10av/mhc-gr10av_operating-instructions-manual_1330007017.webp)
Basic Operations
17
n
To listen to non-preset radio
stations
Press TUNING MODE repeatedly so that
“MANUAL” appears in step 2, then tune in
the station by turning the jog dial.
Tips
• Pressing TUNER/BAND when the power is off
automatically turns the power on and tunes to the
last received station (One Touch Play).
• You can switch from another source to the radio
just by pressing TUNER/BAND (Automatic
Source Selection).
• When an FM programme is noisy, press
STEREO/MONO so that “MONO” appears in the
display. There will be no stereo effect, but the
reception will improve. Press the button again to
restore the stereo effect.
• To improve broadcast reception, reorient the
supplied aerials.
n
n
1
Press TUNER/BAND repeatedly
until the band you want appears in
the display.
The bands you can receive vary
depending on the model you purchased.
Be sure to check which bands you can
receive.
Every time you press this button, the
band changes as follows:
3 band model:
FM
n
MW
n
LW
4 band model:
FM
n
MW
n
LW
n
UKV*
*“STEREO PLUS” is displayed when you select
UKV.
2
Press TUNING MODE repeatedly
so that “PRESET” appears in the
display.
MANUAL
n
AUTO
n
PRESET
3
Turn the jog dial (or press
=
or
+
on the remote) to tune in the
desired preset station.
To
Do this
Turn off the radio
Press POWER.
Adjust the volume
Turn VOLUME (or press
VOLUME +/– on the
remote).
Turn counter-
clockwise
(or press
=
on the remote)
for lower preset
numbers.
Turn clockwise
(or press
+
on the remote)
for higher
preset numbers.
+
–
TUNED
STEREO
MHz
VOLUME
PRESET
Preset number
Frequency
Summary of Contents for MHC-GR10AV
Page 51: ...51 ...