![background image](http://html.mh-extra.com/html/sony/mhc-gpx5/mhc-gpx5_operating-instructions-manual_1330006022.webp)
22
GB
Creating a party
atmosphere
(DJ EFFECT)
1
Press DJ EFFECT.
The DJ EFFECT button lights up and
the last selected effect is activated.
2
Press the following button to
select the effect type.
• FLANGER: Create a deep flanging
effect that is similar to the roar of a
jet plane.
• ISOLATOR: Isolate a specific
frequency band by adjusting the
other frequency bands. For example,
when you want to focus on vocal and
etc.
• SOUND FLASH: Flash the sound
output. The sound cuts off
periodically.
• PHASER: Create a series of peaks
and troughs in the frequency
spectrum, like a sweeping effect.
3
Turn DJ CONTROL to adjust the
effect level.
To turn off the effect
Press DJ EFFECT again.
Notes
• The DJ EFFECT is automatically turned off
when you turn off the system or change the
function or tuner band.
• If you activate the DJ EFFECT during
transferring, the sound effect will not be
transferred onto the USB device.
• You cannot use DJ CONTROL/MASTER
VOLUME to adjust the volume when the
DJ EFFECT is activated. Press /–
on the remote control to adjust the volume.
Singing along
(MHC-GPX8/MHC-GPX7 only)
You can sing along with any audio source
that played back on this system.
1
Turn MIC LEVEL to MIN to reduce
the microphone volume level.
2
Connect a microphone to the
MIC jack on the unit.
3
Start playing the music and
adjust the volume.
4
Turn MIC LEVEL to adjust the
microphone volume.
If acoustic feedback (howling) occurs,
reduce the volume, move the
microphone away from the speakers,
or change the direction of the
microphone.
After you have finished, disconnect the
microphone.
Note
The sound from the microphone will not be
transferred onto the USB device during USB
transferring.
Other Operations