![background image](http://html.mh-extra.com/html/sony/mhc-gn70v/mhc-gn70v_operating-instructions-manual_1329996025.webp)
MHC-GN70 4-246-556-
11
(3)
Sound Adjustment
25
GB
Frequency band
Frequency level
LINK
LINK
ALL DISCS
SURR
EFFECT
V - GROOVE
B
A
Adjusting the graphic
equalizer and storing the
personal file
You can adjust the sound by raising or
lowering the level of specific frequency band,
then store up to three personal files (P FILE) in
the memory.
Before adjustment, select the preset effect you
want for your basic sound.
1
Press
<
or
,
repeatedly to select a
frequency band or cinema space effect,
then press
M
or
m
repeatedly to adjust
the level or select the cinema space
effect you want.
2
Press and hold P FILE until the
personal file number appears in the
display.
3
Press
M
and
m
or
<
and
,
repeatedly
to select the personal file number
where you want to store the equalizer
setting.
You can select from “P FILE 1” to
“ P FILE 3”.
4
Press PUSH ENTER (or ENTER on the
remote).
The setting is stored automatically in the
personal file number you selected in step 3.
The previous setting stored at this memory
location is erased and replaced by the new
setting.
To call up the personal file
Press P FILE repeatedly until the personal file
number you want appears in the display.
Tip
If you do not want to store a personal file, press
PUSH ENTER (or ENTER on the remote) after
step 1.
Selecting the cinema
space effect
Press CINEMA SPACE on the remote.
Each time you press the button, the display
changes cyclically as follows:
C.SPACE LOW
t
C.SPACE HIGH
t
C.SPACE OFF
Note
When you select certain preset effects, the cinema
space effect may be cancelled.