![background image](http://html.mh-extra.com/html/sony/mhc-ex660/mhc-ex660_operating-instructions-manual_1329985023.webp)
23
GB
Addi
tio
nal
In
fo
rm
at
ion
* This system supports FAT16 and FAT32, but
some USB device may not support all of these
FAT. For details, refer to the operating
instructions of each USB device or contact the
manufacturer.
Tuner
Severe hum or noise, or stations
cannot be received. (“TUNED” or
“ST” flashes in the display panel.)
• Connect the antenna properly.
• Change antenna location and its
orientation to obtain good reception.
• Connect a commercially available
external antenna.
• Consult your nearest Sony dealer if the
supplied AM antenna has come off from
the plastic stand.
• Turn off surrounding electrical
equipment.
To reset the system
If the system still does not operate
properly, reset the system to factory
default settings.
Use the buttons on the unit to perform this
operation.
1
Unplug and plug the power cord
back in.
2
Press
"/1
to turn on the system.
3
Hold down
x
, OPTIO
N
S and
"/1
at the same time.
“RESET” appears in the display panel.
All user-configured settings, such as
preset radio stations, timer, and the
clock are reset to factory default
setting.
Messages
Disc/Timer
FULL
You tried to program more than 25 steps.
NO DISC
There is no disc on the disc compartment
or you have loaded a disc that cannot be
played back on this system.
NO STEP
All of the programmed steps have been
erased.
NOT USED
You have pressed a button those operation
is not allowed or invalid at this time.
OVER
You have reached the end of the disc
while pressing
M
during playback or
pause.
PUSH SELECT
You tried to set the clock or timer during
timer operation.
PUSH STOP
You tried to perform an operation that can
be performed only when the playback is
stopped.
READING
The system is reading information of the
disc. Some buttons are not available.
SET CLOCK
You pressed CLOCK/TIMER SELECT
before the clock is set.
SET TIMER
You pressed CLOCK/TIMER SELECT
before the Play Timer is set.
TIME NG
The Play Timer start time and stop time is
the same.
Continued
l