33
GB
Additional Inf
MHC-ECL99BT/MHC-ECL77BT.4-539-415-11(1)
The sound skips or fluctuates, or the
connection is lost.
ˎ
The system and the BLUETOOTH
device are too far apart.
ˎ
If there are obstacles between the
system and your BLUETOOTH device,
remove or avoid the obstacles.
ˎ
If there is equipment that generates
electromagnetic radiation, such as
a wireless LAN, other BLUETOOTH
device, or a microwave oven nearby,
move them away.
The sound of your BLUETOOTH device
cannot be heard on this system.
ˎ
Increase the volume on your
BLUETOOTH device first, then adjust
the volume using /–.
There is severe hum, noise or
distorted sound.
ˎ
If there are obstacles between the
system and your BLUETOOTH device,
remove or avoid the obstacles.
ˎ
If there is equipment that generates
electromagnetic radiation, such as
a wireless LAN, other BLUETOOTH
device, or a microwave oven nearby,
move them away.
ˎ
Turn down the volume of the
connected BLUETOOTH device.
To change the AM tuning interval
(except for North American,
European and Russian models)
The AM tuning interval is preset to
9 kHz or 10 kHz by factory default.
Use buttons on the unit to change the
AM tuning interval.
1
Tune to any AM station.
2
Hold down MEGA BASS on the unit
until “530” (10 kHz) or “531” (9 kHz)
appears on the display.
All the AM preset stations are
erased.
To reset the system to factory
settings
If the system still does not operate
properly, reset the system to factory
settings.
1
Disconnect and reconnect the
power cord, and then turn on the
system.
2
Hold down
and EQ on the unit
until “RESET” appears.
All user-configured settings, such
as preset radio stations, the pairing
registration information, timer,
and the clock are reset to factory
default settings.
To turn off the automatic standby
function
This system is equipped with an
automatic standby function. With
this function, the system enters
standby mode automatically in about
15 minutes when there is no operation
and no audio signal is detected.
By default, the automatic standby
function is turned on.
Hold down
while the system
is on, until “AUTO STANDBY OFF”
appears.
To turn on the function, repeat the
procedure until “AUTO STANDBY ON”
appears.
Notes
ˎ
The automatic standby function is invalid
for the tuner function.
ˎ
The system may not enter standby mode
automatically in the following cases:
when an audio signal is detected.
during playback of audio tracks or files.
while the preset Play Timer or Sleep
Timer is in process.
Summary of Contents for MHC-ECL77BT
Page 82: ...44ES ...
Page 83: ...45ES Información adicional ...