EN
Chapter 4: the Tape Player
15
Recording a CD
You can record from a CD to a tape.
Use TYPE I (normal) or TYPE II (CrO
2
)
tapes. Do not use TYPE IV (metal) tapes for
recording.
To listen to other sources while recording,
you must stop recording.
Recording a CD
Automatically
By using CD SYNCHRO, you can record
from a CD to a tape quickly.
Use the buttons on the unit to do this
operation.
1
Press
§
EJECT and insert a blank tape
into deck B with the side you want to
record on facing forward.
Recording will start from the front side
of the tape, unless you have changed the
playing direction before recording.
Make sure the tabs on the cassette have
not been removed.
2
Press
§
OPEN/CLOSE and place a CD.
Then, press
§
OPEN/CLOSE again to
close the disc tray.
If the indicator for the disc tray
containing the CD you want to record is
not lit green, press DISC SKIP
EX-CHANGE repeatedly so that it lights
green.
3
Select dual or single-sided recording.
*
Recording always stops at the end of the
reverse side. Be sure to start from the
front side.
4
Press CD SYNCHRO.
Deck B stands by for recording.
5
Press
∏
PAUSE to release recording
pause.
Recording starts.
After about 10 seconds, the CD starts
playing.
To stop recording
Press
π
on deck or the CD player.
To add the surround effect
Press SURROUND so that “SUR
”
appears.
You can record the sound with surround
effect.
The equalizer you adjusted will not be
recorded.
To activate DOLBY NR
When you want to reduce the hiss noise in
low-level high-frequency signals, press
DOLBY NR so that “DOLBY NR B” appears
in the display after step 3.
Recording a CD Manually
You can record a CD as you like, for
instance, record just the songs you want or
record from the middle of the tape.
1
Press
§
EJECT and insert a blank tape
into deck B with the side you want to
record on facing forward.
Recording will start from the front side
of the tape, unless you have changed the
playing direction before recording.
Make sure the tabs on the cassette have
not been removed.
2
Press
§
OPEN/CLOSE and place a CD.
Then, press
§
OPEN/CLOSE again to
close the disc tray.
If the button for the disc tray containing
the CD you want to record is not lit
green, press DISC SKIP EX-CHANGE
repeatedly so that it lights green.
3
Press FUNCTION to select the CD
player.
4
Select dual or single-sided recording.
*
Recording always stops at the end of the
reverse side. Be sure to start from the
front side.
5
When you want to reduce the hiss noise
in low-level high-frequency signals,
press DOLBY NR so that “DOLBY NR
B” appears in the display.
6
Press
®
REC.
Deck B stands by for recording.
7
Press
∏
PAUSE to release recording
pause.
Recording starts.
8
Press
fl
on the CD player.
The CD starts playing.
Recording a CD:
Selecting Tape
Length
Automatically (tape
select edit)
You can have the stereo system select and
indicate the most suitable tape length for
recording each disc automatically.
You cannot use Tape Select Edit for discs
which contain 21 tracks or more.
To record
One side of the tape
Both sides*
Press DIRECTION to
select
A
ß
or RELAY
continue to next page
➔
To
Stop recording
Pause recording
Stop CD play
Pause CD play
Press
π
on deck
∏
PAUSE
π
on the CD player
fl
on the CD player
To record
One side of the tape
Both sides*
Press DIRECTION
to select
A
ß
or RELAY
POWER
n
ON
DOLBY NR
1
5
3
4
π
SURROUND
2
DISC SKIP EX-CHANGE
POWER
n
ON
4
5
6
1
7
8
3
π
π
2
DISC SKIP EX-CHANGE
POWER
n
ON
3
5
6
4
7
1
2
DISC SKIP EX-CHANGE
