MEX-BT4100E/BT4100P/BT4100U/BT4150U
2
2. DIAGRAMS
THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS.
(In addition to this, the necessary note is printed in each block.)
For Schematic Diagrams.
Note:
• All capacitors are in
μ
F unless otherwise noted. (p: pF) 50
WV or less are not indicated except for electrolytics and
tantalums.
• All resistors are in
Ω
and 1/4 W or less unless otherwise
speci
fi
ed.
•
f
: Internal component.
•
C
: Panel designation.
•
A
: B+ Line.
• Power voltages is dc 14.4V and fed with regulated dc
power supply from ACC and BATT cords.
• Voltages are dc with respect to ground under no-signal
(detuned) conditions.
no mark : TUNER (FM)
< > : CD PLAY
• Voltages are taken with VOM (Input impedance 10 M
).
Voltage variations may be noted due to normal production
tolerances.
• Signal path.
F
:
AUDIO
f
:
TUNER
J
:
CD
d
:
USB
h
:
SIRIUS/XM
E
:
AUX
a
:
Bluetooth
For Printed Wiring Boards.
Note:
•
X
: Parts extracted from the component side.
•
Y
: Parts extracted from the conductor side.
•
f
: Internal component.
•
: Pattern from the side which enables seeing.
(The other layers’ patterns are not indicated.)
• Indication of transistor.
C
B
These are omitted.
E
Q
Caution:
Pattern face side:
(Conductor Side)
Parts face side:
(Component Side)
Parts on the pattern face side seen
from the pattern face are indicated.
Parts on the parts face side seen from
the parts face are indicated.
• Abbreviation
EA
: Saudi Arabia model
MX
: Mexican model
Note:
When the complete MAIN board is replaced, the desti-
nation setting is necessary. Refer to “NOTE THE MAIN
BOARD OR SYSTEM CONTROLLER (IC501) RE-
PLACING” on page 4 on original service manual.
Note:
When the complete MAIN board is replaced, the desti-
nation setting is necessary. Refer to “NOTE THE MAIN
BOARD OR SYSTEM CONTROLLER (IC501) RE-
PLACING” on page 4 on original service manual.
