42
MEX-BT38UW/BT3800U/BT3807U/BT3850U
SECTION 6
ELECTRICAL PARTS LIST
ANTENNA
BOARD
**************
< CONNECTOR >
CN1
1-821-559-11 CONNECTOR, COAXIAL (SMT TYPE)
************************************************************
A-1641-142-A BT BOARD, COMPLETE (Included in MAIN board)
******************
When BT board is defective, exchange the entire mounted board.
************************************************************
JACK
BOARD
***********
< FERRITE BEAD >
FB901
1-414-760-21 INDUCTOR, FERRITE BEAD
FB902
1-414-760-21 INDUCTOR, FERRITE BEAD
FB903
1-414-760-21 INDUCTOR, FERRITE BEAD
< JACK >
J901
1-821-687-21 JACK, 3.5 SMALL TYPE (AUX)
************************************************************
KEY
BOARD
**********
< CAPACITOR >
C901 1-107-826-11 CERAMIC
CHIP 0.1uF
10% 16V
C902 1-107-826-11 CERAMIC
CHIP 0.1uF
10% 16V
C903 1-107-826-11 CERAMIC
CHIP 0.1uF
10% 16V
C904 1-125-891-11 CERAMIC
CHIP 0.47uF 10% 10V
C906 1-107-826-11 CERAMIC
CHIP 0.1uF
10% 16V
C909 1-162-927-11 CERAMIC
CHIP 100PF 5% 50V
C910 1-162-927-11 CERAMIC
CHIP 100PF 5% 50V
C911 1-162-927-11 CERAMIC
CHIP 100PF 5% 50V
C912 1-107-826-11 CERAMIC
CHIP 0.1uF
10% 16V
< DIODE >
D901
6-501-817-01 DIODE MA2J1110GLS0
D902
6-501-730-01 DIODE MAZ8051GMLS0
D906
6-501-782-01 DIODE MAZ8180GMLS0
D907
6-501-743-01 DIODE MAZ8068GMLS0
D908
6-501-743-01 DIODE MAZ8068GMLS0
D909
6-501-743-01 DIODE MAZ8068GMLS0
D910
6-501-743-01 DIODE MAZ8068GMLS0
D911
6-501-743-01 DIODE MAZ8068GMLS0
D912
6-501-743-01 DIODE MAZ8068GMLS0
< IC >
6-714-396-01 IC LC75829PWH-US-H
< COIL >
L901
1-457-223-11 COMMON MODE CHOKE COIL
< LED >
LED901 6-501-339-01 LED NESW505CT-AST (LCD BACK LIGHT)
LED903 6-501-547-02 LED CL-197HB1E-D-T (
Z
)
LED905 6-501-547-02 LED CL-197HB1E-D-T (DISC SLOT INDICATOR)
LED907 6-501-547-02 LED CL-197HB1E-D-T (ILLUMINATION)
LED909 6-501-547-02 LED CL-197HB1E-D-T (ILLUMINATION)
LED910 6-501-547-02 LED CL-197HB1E-D-T (
M
>
, SEEK +)
LED912 6-501-547-02 LED CL-197HB1E-D-T (SEEK –,
. m
)
LED914 6-501-547-02 LED CL-197HB1E-D-T (SOURCE, OFF)
LED916 6-501-547-02 LED CL-197HB1E-D-T (ZAP)
LED919 6-501-547-02 LED CL-197HB1E-D-T (BACK, MODE)
LED921 6-501-547-02 LED CL-197HB1E-D-T (BROUSE)
LED924 6-502-395-01 LED SL-194S-WS-SD-T (RING ILLUMINATION)
LED925 6-502-395-01 LED SL-194S-WS-SD-T (RING ILLUMINATION)
LED928 6-502-395-01 LED SL-194S-WS-SD-T (RING ILLUMINATION)
LED929 6-502-395-01 LED SL-194S-WS-SD-T (RING ILLUMINATION)
LED932 6-501-547-02 LED CL-197HB1E-D-T (ILLUMINATION)
LED934 6-501-547-02 LED CL-197HB1E-D-T (ILLUMINATION)
< SWITCH >
LSW905 1-798-285-11 TACTILE SWITCH (WITH LED) (SCRL, DSPL)
LSW906 1-798-285-11 TACTILE SWITCH (WITH LED) (PAUSE, 6)
LSW907 1-798-285-11 TACTILE SWITCH (WITH LED) (MIC, 5)
LSW908 1-798-285-11 TACTILE SWITCH (WITH LED) (SHUF, 4)
LSW909 1-798-285-11 TACTILE SWITCH (WITH LED) (REP, 3)
LSW910 1-798-285-11 TACTILE SWITCH (WITH LED) (ALBM +, 2)
LSW911 1-798-285-11 TACTILE SWITCH (WITH LED) (ALBM –, 1)
LSW912 1-798-285-11 TACTILE SWITCH (WITH LED) (CAT, BTM)
(BT38UW/BT3800U: US, CND)
LSW912 1-798-285-11 TACTILE SWITCH (WITH LED) (PTY, AF/TA)
(BT3800U: AEP, UK/BT3807U)
LSW912 1-798-285-11 TACTILE SWITCH (WITH LED) (BTM) (BT3850U)
LSW913 1-798-285-11 TACTILE SWITCH (WITH LED) (BLUETOOTH, BT)
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
ANTENNA
When indicating parts by reference num-
ber, please include the board name.
Note:
• Due to standardization, replacements in
the parts list may be different from the
parts speci
fi
ed in the diagrams or the com-
ponents used on the set.
• -XX and -X mean standardized parts, so
they may have some difference from the
original one.
• Items marked “
*
” are not stocked since
they are seldom required for routine ser-
vice. Some delay should be anticipated
when ordering these items.
• CAPACITORS
uF:
μ
F
• COILS
uH:
μ
H
• RESISTORS
All resistors are in ohms.
METAL:
Metal-
fi
lm resistor.
METAL OXIDE: Metal oxide-
fi
lm resistor.
F:
non
fl
ammable
• SEMICONDUCTORS
In each case, u:
μ
, for example:
uA.
. :
μ
A. . , uPA. . ,
μ
PA. . ,
uPB.
.
:
μ
PB. . , uPC. . ,
μ
PC. . ,
uPD.
.
:
μ
PD. .
• Abbreviation
CND : Canadian model
EA
: Saudi Arabia model
The components identi
fi
ed by mark
0
or dotted line with mark
0
are critical for
safety.
Replace only with part number speci
fi
ed.
Les composants identi
fi
és par une marque
0
sont critiques pour la sécurité.
Ne les remplacer que par une pièce portant
le numéro spéci
fi
é.
Note:
When the BT board is replaced, it is necessary to con
fi
rm operation. Refer to “BLUETOOTH FUNCTION
CHECKING METHOD USING A CELLULAR PHONE” of the servicing notes (See page 6).
BT
JACK
KEY